Summary: SomNandi Industries designs and manufactures sound proof enclosures that reduce industrial machine noise to safe, compliant levels without restricting airflow, access, or output. A sound proof enclosure is a fabricated acoustic housing built around noise-generating equipment, using layered insulation and sealed panels to block and absorb sound before it reaches the workplace or surrounding community. This page is written for plant managers, EHS officers, and procurement teams handling compressors, generators, blowers, punch presses, or turbines where noise levels exceed OSHA’s 90 dB(A) 8-hour exposure limit or local CPCB norms, and who need a compliant, industry-tested enclosure rather than a generic metal cover.
SomNandi Industries: Built on Certified Acoustic Testing, Not Just Fabrication
What separates a sound proof enclosure manufacturer from a general fabricator is whether the panels are actually tested, not just claimed. SomNandi Industries designs enclosures around Sound Transmission Class (STC) ratings verified against recognized acoustic testing protocols, with panel performance validated across the full octave band range from 63 Hz to 8 kHz, the range where most industrial machine noise, from low-frequency compressor hum to high-frequency turbine whine, actually lives. That distinction matters because a panel that blocks mid-range noise well can still leak badly at 63 Hz, which is exactly the frequency most DG sets and compressors generate.
What Is a Sound Proof Enclosure?
A sound proof enclosure is a fabricated structure, typically built from CRCA or GI steel with a mineral wool or rockwool acoustic core, engineered to contain noise at its source rather than treating the surrounding room. Unlike acoustic curtains or wall treatments, an enclosure wraps the machine itself, which means ventilation, access doors, cable entries, and vision panels all have to be acoustically sealed as a system. A sound proof enclosure that reduces wall noise by 40 dB but leaks through an unsealed door hinge or an open louver will still fail a site noise reading, which is the single most common defect we find when inspecting third-party installations.
Sound Proof Enclosures for Industrial Noise Control: Who Actually Needs One
Sound proof enclosures for industrial noise control are specified whenever machine-generated noise threatens worker hearing safety, breaches environmental noise limits, or disrupts nearby sensitive operations such as testing labs or control rooms. This applies across manufacturing plants, power stations, workshops, and industrial testing facilities, for both indoor machinery and outdoor equipment exposed to weather. If your facility has received an audit flag for exceeding OSHA’s 90 dB(A) time-weighted average exposure limit, an enclosure addressing the source is generally more cost-effective long-term than rotating hearing protection schedules alone.
TDS (Technical Data Sheet)
| Parameter | Specification |
|---|---|
| Product Name | Turbine Acoustic Enclosure / DG Acoustic Enclosure |
| Applicable Equipment | Gas turbine, steam turbine, diesel generator set |
| Wall Panel Construction | Double-skin steel with mineral wool acoustic core |
| Panel Thickness | 75 mm to 150 mm depending on target dB(A) |
| Standard Noise Reduction | 25 to 40 dB depending on turbine model and design |
| Target Site Noise Level | 85 dB(A) at 1 metre for gas turbines (typical) |
| Frame Material | Mild carbon steel, galvanized steel, or SS 304/316 |
| Ventilation | Acoustic louvers, silencers, attenuators sized to airflow needs |
| Fire and Gas Protection | Flame and gas detectors, IP55 F&G panel, Zone 2 rated devices |
| Access Features | Access doors, removable panels, cable entry points |
| Enclosure Format | Modular panel, walk-in cabin, or drop-over canopy |
Specifications, Benefits, Applications and Installation Process for Turbine Acoustic Enclosure
What Does an STC Rating Actually Mean for Your Enclosure?
Short answer: The STC rating tells you how much airborne sound a panel blocks across a range of frequencies, and SomNandi enclosures are built to reach STC-40 to STC-60 depending on the target noise reduction required, with full octave band transmission loss data from 63 Hz to 8 kHz rather than a single averaged number. A higher STC is not automatically better if your dominant noise source sits outside the frequency range the panel was optimized for, which is why the octave band breakdown matters more than the headline STC figure alone.
Technical Data Sheet
| Parameter | Specification |
|---|---|
| Product Name | Sound Proof Enclosure / Noise Reduction Enclosure for Machines |
| STC Rating Range | STC-40 to STC-60 |
| Frequency Range Tested | 63 Hz to 8 kHz, full octave band |
| Panel Material | CRCA / GI steel with mineral wool acoustic core |
| Fire Rating | Fire-rated, non-fire-catching construction |
| Weather Protection | Water-resistant, powder or epoxy coated finish |
| Ventilation | Insulated ducts with acoustically treated louvers |
| Lighting and Wiring | Internal electrical wiring with lighting arrangement |
| Vision Access | Acoustic vision panels for external visibility |
Sound Proof Enclosures vs Acoustic Curtains: Which Actually Works for Machines
A sound proof enclosure treats the machine at the source, sealing it inside an acoustically rated shell, while acoustic curtains or wall panels only reduce noise reflecting around a room. For compressors, generators, and press machines generating high, continuous noise, an enclosure typically outperforms room treatment because it stops noise before it disperses, rather than absorbing it after the fact. Curtains have a place in mixed-use spaces where full enclosure is not practical, but for compliance-driven noise reduction, enclosure is the more reliable route.
Myth vs Reality
| Myth | Reality |
|---|---|
| Any sealed steel box blocks noise well | Untested panels often leak at low frequencies badly |
| More paint or coating improves sound blocking | Coating protects surfaces, insulation blocks sound |
| Enclosures always restrict machine cooling | Acoustic louvers preserve airflow when sized right |
| Higher STC number always means quieter room | Frequency match to source noise matters more |
| Outdoor machines cannot use full enclosures | Weather-rated enclosures suit outdoor installations |
Frequently Asked Questions
What is a sound proof enclosure used for?
What STC rating is good for industrial enclosures?
Do sound proof enclosures reduce machine cooling?
Can sound proof enclosures be used outdoors?
What is the OSHA noise limit for machinery?
Are sound proof enclosures fire safe?
How is enclosure noise reduction actually tested?
Can one enclosure design fit different machines?
Do enclosures need vision panels?
How long do industrial sound enclosures typically last?
Get a Custom Sound Proof Enclosure Quote from SomNandi Industries
SomNandi Industries builds sound proof enclosures for compressors, generators, blowers, turbines, and press machines across Indian manufacturing, power, and testing facilities. Share your machine specification and current noise reading, and our team will recommend the right STC rating, ventilation design, and finish for your site.
SomNandi Industries
Email: sales@somnandi.com
Phone: +91 98714 10959
Enquire Now for a Site Visit and Quote »